Increasing your climbing skill is not just contingent on increasing strength, but from developing strategy as well, specifically how well you can “read” a climbing route. Whether you’re onsighting at the gym or projecting outdoors, route reading helps you visualize moves, conserve energy, and climb more efficiently. How do you get better at reading routes? You can start by learning to think like a route setter.
Route setters are essentially puzzle designers, creating problems on the wall to be solved physically and mentally. All route setters create problems that have intended beta; the setter’s plan for how the problem should best be solved with body movement, angles, and positioning. By understanding a setter’s logic, you can start decoding routes more effectively, identifying intended beta, and improving your movement on the wall.
Wall Angles: Slab, Face, Overhangs, and Roofs

The first thing to consider when reading a route is the angle of the wall on which the climb is set. This single detail tells you a lot about what type of movement, body positioning, and body tension to expect.
A face wall or slab will demand more precise footwork and balance. You’ll need to pay close attention to weight distribution, including keeping your body flat to the wall to ensure your gravity and force remains over your feet. A slab or face wall instantly suggests that you will be moving slowly and delicately.
On slightly overhung walls (45 degrees being a common wall angle), the climbing often becomes more physical, requiring tension in the core that stems out through your limbs. Controlled body positioning under tension helps to avoid wasting energy through flailing arms or legs or unnecessary pulling.
On steep or roofed walls (angles that are extremely steep or fully upside down), route setters tend to incorporate big, powerful moves created by setting with larger, “juggier” holds, that require a climber to generate momentum through dynamic movements originating from the hips, feet, and legs. Some moves even require climbers to cut feet and/or campus on a problem, which is climbing one or more moves with no feet on the wall.
Hold Types: Slopers, Crimps, Pinches, and Jugs
Wall angle gives a suggestion of what type of body positioning and strength might be required for a climb, but assessing the hold type is what will let a climber truly understand how to successfully send a route.
Slopers typically suggest compression or a pressing contact, successfully executed by maximizing surface area contact and keeping your center of gravity low and under the sloper. Slopers require a high level of body placement awareness and slower more intentional moves.
Crimps require a completely different grip type than slopers, forcing a climber to rely on finger strength and small squeezing force through a full crimp, half crip, or sometimes a finger dragging motion. Crimps can also suggest static, controlled movement and good core engagement.
Pinches can range from wide pinches (usually more difficult) that taper outward towards the fingertips, to small pinches that can be difficult to engage on. All pinches require a climber’s thumb to be on the opposite side of the hold as their fingers and usually involve pulling inward, bringing your body into the wall, as opposed to pulling down on the hold like with crimps.
Jugs are widely considered the “best” holds because they usually offer an opportunity for rest. Jugs can also be starting points, especially in competition style bouldering, for big moves that require a lot of momentum generation (like laches and dynos).
Identifying each hold type on the route and imagining how your body will feel on each hold is a quick way to start reading a route. This will allow you to anticipate where a crux or difficult move might be for you on the route according to the type of hold and the requirements to utilize it.
Body Position: Hips, Hips, Hips

Reading body position beta is one of the more advanced techniques of route reading, but it is extremely important in imagining your body on the wall. Setters use hold orientation and spacing to suggest specific body positions. The force vector of a hold is usually perpendicular to the angle of the hold on the wall and is a good indication of where your body will be directed when engaging with that hold.
Paying attention to the hips is crucial for accurately interpreting beta. Setters create routes that challenge climbers to utilize their hips to stay close to the wall on a slab climb, or turn a hip into the wall to create a flagging shape, or even swing the hips on a dynamic climb to generate momentum for a dyno move. Hips are the leader in any climb for generating momentum, conserving energy, and shifting your center of gravity. Many climbers make the mistake of relying too much on their arms to pull up to the next hold, but will find themselves pumped before the route is complete.
Thinking like a setter means looking for opportunities to use your hips and legs to drive your movement into the next hold, using your arms more as fulcrums and pulling to direct momentum, rather than simply applying brute force. If the next hold on a route is far away, consider how shifting your hips, twisting one into the wall, driving through your feet, or initiating a controlled swing might help you flow more naturally through the sequence.
Visualizing the movement of your hips during the climb, where they should face to generate force, how they should shift to maintain balance, and where they should face at the end of a move, can make a dramatic difference in your efficiency through a climb and ability to send higher grades.
Reading routes is part strategy, part intuition, and part creativity. It’s a mental muscle that strengthens over time. The more you climb with the mindset of a route setter, the more you’ll start to anticipate what the route is asking you to do, and the more skillful and effective your beta will become.
What are your favorite moves to conquer? Let us know in the comments below!

